CCTV MON-4HD, User Manual, Page: 8 / 104

Page 6
connected cable from messy cables. （ *Optional ）
²
Ping test, PING is the most conventional network debugging tools; it is used for testing if the
connected IP camera or other network equipment’s Ethernet port is working normally and the
IP address is correct.
² In digital IP surveillance applications, if the IP camera’s IP address is not known; the device
cannot be used. An IP address scan can quickly search for the connected IP camera or other
network device’s IP address.
² The PoE voltage test can test for PoE voltage when a POE switch is supplying POE power
to an IP camera
² TDR cable test, test cable open circuit and short-circuit
（
*Optional
）
² Cable test , Test LAN cable or telephone cable,UTP cable etc ,cable type and the sequence of
wires will be displayed
² Support RS232/RS485,Rate 600 ～ 115200bps adjustable
² PTZ protocol analysis, control protocol command displays to check RS485 transmission
whether is normal, easy to find the fault device
² PTZ control. Pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and
sets and the preset position
² DC12V 2A output power for camera
²
PoE 24W power output,supply temporary power for PoE camera
² DC5V 2A power output,as a power bank
² Audio input and output, test and output the audio signal
² 7.4V 48.1Wh Battery. Remaining battery charge indicator, Lithium Ion Polymer Battery can last
16 hours for normal use after charging for 8 hours
“*”Sign means the function Optional