Page 11
connected cable from a bundle of cables with an audio tone.
2.3.22 DHCP dynamic address assignment
Built in DHCP server: Dynamically assign IP address for the IP camera or network device.
2.3.23 Access the dynamic IP address
The IP tester can directly access a dynamic IP address assigned from its DHCP server and use it as the
tester’s IP address. No need to set a IP address manually.
2.3.24 Multi- segments IP Cameras Test
Support Multi- segment Static IP address setting, which can simultaneously test different segments IP
network cameras.
2.3.25 Network bandwidth testing
The network bandwidth test needs two IP testers to test bandwidth: one as a transmitter, the other as a
receiver.
2.3.26 IP address scan
The IP address scan can quickly search for connected IP cameras or another network device IP address.
2.3.27 PING Test
PING is the most conventional network debugging tools; It is used for testing if the connected IP camera
or other network equipment’s Ethernet port is working normally and the IP address is correct.
2.3.28 Port Finder
The tester will send signals to make the connected PoE port flicker at a set frequency. This will enable
the installer to easily and quickly find the connected port for an Ethernet cable.
2.3.29 PoE Test
Test the PoE voltage from a PoE switch. The unit will clearly display the voltage for each wire in an
Ethernet cable.
Summary of Contents for MON-4HD
Page 17: ...Page 15 2 5 Function interface...