DAY/NIGHT
Default
Descriptions
BURST
OFF
BURST
mode contains color burst signal when the camera switches to B/W.
ON mode maintains the same color signal in B/W so that the video signal
provides better compatibility with certain color equipment.
OFF mode removes the color burst signal B/W video and increase the total TV
lines.
DELAY
CNT
005
DELAY CNT
is the time in seconds before Day
ļ
Night switches. DELAY can
avoid the unwanted/frivolous switching of short term lights such as light from
a passing car.
DAY
ĺ1,*+7
005
DAY
ĺ1,*+7
mode sets a threshold level to determine when switch from
DAY to NIGHT. Lower (Higher) value makes the camera switched from Day to
Night at lower (higher) illumination.
If the camera stays in Color at night time, increase
DAY
ĺ1,*+7
threshold
value until it just switches to Night.
CAUTION
If the value between DAY
ĺ1,*+7
and NIGHT
ĺ
DAY is
minimal, then camera may switch between DAY and NIGHT mode
repeatedly.
NIGHT
ĺ
DAY.
3
NIGHT
ĺ
DAY
mode sets a threshold level to determine when to switch from
NIGHT to DAY. Lower (Higher) value makes the camera switched from Night
to Day at lower (higher) illumination.
If the camera stays in B/W mode during day time, decrease
NIGHT
ĺ
DAY
threshold value until it switches to Day.
CAUTION
If the value between DAY
ĺ1,*+7
and NIGHT
ĺ
DAY is
minimal, then camera may switch between DAY and NIGHT mode
repeatedly.
4.7.2 DAY/NIGHT
Adjust the settings of
DAY/NIGHT
.
Function
Option
BURST
ON
OFF
DELAY CNT
000-255
DAY->NIGHT
000-255
NIGHT->DAY
000-255
•
BURST
Select to set whether to output the burst signal when the Night status
has been identified.
-
ON
: Burst signal ON
-
OFF
: Burst signal OFF
•
DELAY CNT
Select to set the Night/Day identification transfer time.
•
DAY->NIGHT
Select to set the threshold for identifying the Night status from the Day
status.
•
NIGHT->DAY
Select to set the threshold for identifying the Day status from the Night
status.
16
