CCTV CSP-E700IR, User Manual

Page: 18 / 28

4.7 DAY/NIGHT
This item is used to set the Day/Night function.
SETUP MENU
LENS AUTO< ŋ
SHUTTER/AGC AUTO< ŋ
NR < ŋ
WHITE BAL ATW< ŋ
ATR OFF
BACKLIGHT OFF
DAY/NIGHT AUTO< ŋ
NEXT< ŋ
EXIT< ŋ SAVE ALL< ŋ
Select to set DAY/NIGHT to AUTO , COLOR or B/W .
Function Option
DAY/NIGHT
AUTO
< ŋ
COLOR
B/W
AUTO
Day or Night is automatically identified and controlled accordingly.
When
AUTO
< ŋ
is selected, click ENTER to bring up the DAY/NIGHT
sub-menu for further settings.
COLOR
The Day/Night function is set to OFF .
B/W
The NIGHT mode is established forcibly, and chroma is set to OFF .
When B/W
< ŋ
is selected, click ENTER to bring up the B/W sub-menu for
further settings.
4.7.1 B/W
Adjust the settings of B/W .
Function Option
BURST
ON
OFF
IMPORTANT ACTIVITY!!!
DAY->NIGHT and NIGHT->DAY operations must be examined and verified at the final
installation.
Block the lens for a few seconds for NIGHT mode, then release and let it return to DAY mode.
If camera stays at NIGHT mode for more than 10sec, slightly increase µ1ĺ' THRES’ and repeat the fore-
mentioned steps.
If the scene is too dim or the lens iris was adjusted too low (near close), it may not return to DAY.
15