CCTV Camera Pros
Wireless Surveillance Camera Transmission System
www.cctvcamerapros.com
User Guide |
29
alphabet (case sensitive) or numbers]. The Connection ID
cannot be left blank.
Wireless Setup
Transmit Range
(Km)
To select the approximate distance between the transmitter
and receiver for an improved transmission link [Options: 1~10
kilometers].
10 Kilometers
Transmit Power
To select the transmit power level. [Options: 1, 2, 3, 4, 5]. (In
normal use, set to 5. When testing, if the TX and RX units are
very close (10m), reduce TX Power to avoid signal saturation).
5 (maximum)
PTZ RS485 Setup
(refer to the settings shown on the PTZ controller)
*
These settings apply to both Full and Half Duplex systems
** If a standard, non-PTZ camera is connected, there is no need to change these settings
Baud Rate
Options: 200, 2400, 9600 (input from 200-19,000)
9600
Data Bit
Options: 7, 8
8
Parity
Options: None, Even, Odd
None
Stop Bit
Options: 1, 1.5, 2
1
