CCTV Camera Pros
Wireless Surveillance Camera Transmission System
www.cctvcamerapros.com
User Guide |
17
3. System Setup and Configuration
The Shepherd-200M1 & 600M4 operates as an independent system within an integrated security system and does not need
to cooperate with other network systems. Therefore, if all the Transmitter and Receiver default settings are to be used (for
default settings, see Configuration Settings on page 30), the system can be installed as a simple plug-and-play solution.
However, we recommend that for security reasons, every Shepherd- 200M1 & 600M4 system is configured with its own
unique security settings (using the MagicLink software), and, if 2 or more Shepherd-200M1 & 600M4 systems are used in a
single area, it is vital that each be configured with its own Data Encrypt Key and Connection ID.
To re-configure any of the default settings on the Shepherd-200M1 & 600M4, first install the MagicLink software onto a
Windows-based PC or Notebook, then use MagicLink to change the configuration settings of both the Transmitter and
Receiver.
3.1 Installing MagicLink
MagicLink software allows users to re-configure the Shepherd-200M1 & 600M4 via any Windows-based PC or Notebook. This
section describes how to install MagicLink to your PC.
1. Insert the MagicLink Installation CD-ROM into your computer's CD-ROM drive. Run the
SETUP.EXE
program from the
CD-ROM. The following window will appear:
