14
TO SET THE HI/LO ALERT
1. Press the
[ ALERT ]
key until the desired area is selected.
2. Use
[ ]
key /
[ ]
key to adjust the setting.
3. Press the
[ ALERT ]
key to confirm and continue to next setting.
TO ENABLE / DISABLE THE HI / LO ALERT
1. Press the
[ ALERT ]
key until the desired area is selected.
2. Press the
[ ALARM ]
key to turn the alert on or off.
3. Press the
[ ALERT ]
key to continue to next setting.
Note:
- The unit will automatically exit setting mode in 5 seconds if no key is pressed.
-
When ALERT alarm is on, the area and type of alarm that triggered the alarm will be flashing and the alarm
will sound for 2 minutes.
- To silence the Alert alarm beeping, press the
[ ALARM / SNOOZE ] / [ ALARM ]
key, or let the beeping
alarm automatically turn off after 2 minutes.
WIRELESS SIGNAL RECEPTION
No sensor
Signal searching
Strong signal
Weak signal
Signal lost
The 5-IN-1 sensor is capable of transmitting data wirelessly over an approximate operating of 150m range (line
of sight). Occasionally, due to intermittent physical obstructions or other environmental interference, the signal
may be weaken or lost. In case that the sensor signal is lost completely, you will need to relocate the Display
main unit or the wireless 5-IN-1 sensor.
TEMPERATURE & HUMIDITY
COMFORT INDICATION
The comfort indication is a pictorial indication based on indoor air temperature and humidity in an attempt to
determine comfort level.
Too cold
Comfortable
Too hot
Note:
- Comfort indication can vary under the same temperature, depending on the humidity.
- There is no comfort Indication when temperature is below 0°C(32°F) or over 60°C (140°F).
