Technical instructions
ZX30
v2.0EN
www.ccei.fr
6
4. Compatibility - Control
The BRIO ZX30 LED can operate autonomously with simple power cuts applied to the on/off
switch, or be controlled remotely using an RC system (Brio RC, MOD Brio RC or MeteoR with
OPT Brio RC), or a RC+ system (Brio RC+, MeteoR2).
Beware, with a view to ensuring that your installation is compatible with the other projectors of the
BRIO range, please adhere to the following instructions. In the event of use:
• In autonomous or RC mode, only install the with RC compatible products.
• In RC+ mode, only install the RC+ compatible products.
Compatibility with the other products of the range
Mode RC (Brio RC,
MOD Brio RC, Me-
teoR + OPT Brio RC)
Mode RC+ (Brio
RC+, MeteoR2)
EOLIA WEX30
EOLIA WEX60 V04
EOLIA WEX100 V04
GAÏA GAX30
STELLA WPX30
ALICIA WJX15 V04
BRIO ZX30/60/100
MINI BRIO X15
EOLIA WEX30 V05
EOLIA WEX60 V05
EOLIA WEX100 V06
GAÏA GAX30 V03
STELLA WPX30 V04
ALICIA WJX15 V04
BRIO ZX30 V03
BRIO ZX60/ZX100 V02
MINI BRIO X15 V02
For any models whose version is not specified, all versions are concerned.
For any models whose version is specified, all greater versions are compatible.
Contact your reseller if you have any queries about compatibility before in-
stalling the equipment!
