ENGLISH
Attached to TCITY Installation Manual 07/29/2021
9
4.3 Installation
The lamp fall-down may cause
damage to persons and objects
➢
When mounting the lamp ensure
that the original fastenings are
used, which you may purchase
from the supplier.
➢
Have the fastening accessories
correctly mounted.
Switch off the power supply before
proceeding to installation.
Correct installation using only the
original fastenings TFX01
The T-CITY mounting accessories are
made of:
-
N.2 side fasteners of chrome-
plated steel with M3 fixing screws
and steel handle washers.
-
Direction of the luminous flux
adjustable at +/- 70°.
Installation with TFX01 side-
mounting brackets
➢
Hook the two side brackets on
the lamp sides using the 2
screws provided.
➢
Bore the fixing holes on the
machine surface, as shown
hereunder (Side mounting pitch):
Model
-L-
TC012
…
9.29
”
(236mm)
TC022
…
15.98
”
(406mm)
TC032
…
22.68
”
(576mm)
TC042
…
29.37
”
(746mm)
➢
After the mounting holes have
been made, fix the lamp to the
machine structure using M5
screws of at least 8 mm. length (2
screws for each fastener). The
plate where the lamp will be
mounted has to be at least 2 mm
thick.
ATTENTION
WARNING
Installation
