877-4-SAFETY
|
Fax: 940-382-9435
A Group CBS Company
CBS
Safe
®
Arc
4.0 Use and Operation of the RSK-ABL1
The RSK-ABL1 can be installed over the MCC operating handle regardless of the position of the handle (whether it is in the
ON or OFF position). Care must be taken when installing RSK-ABL1 that the MCC handle is not inadvertently operated.
The RSK-ABL1 is designed to work without modification on the three different types of operating handles shown below.
The installation and operating procedure is the same for all three handle styles.
4.1 Installing the RSK-ABL1 on the MCC Door
STEP 1: Prior to installing the RSK-ABL1 actuator, the
MCC door must be firmly latched or the actuator will
pull the door open. Verify that the door is firmly latched
before proceeding with installing the RSK-ABL1.
STEP 2: Prior to installing the RSK-ABL1 actuator, verify
that the magnets are in the OFF position. Start with
the RSK-ABL1 held low on the switch and while lifting
up on the operating handle with your fingers, slip the
actuator arm under the operating handle and move
the up and over the operating handle mechanism.
