RRS-4 Technical Manual 7/20/2011
2.0 Navigating the Display
The RRS-4 PLC based user interface is located on the top side of the control cabinet. The
user can navigate this 5.6” touch-screen display by simply pressing the appropriate on-
screen button. This section will detail the navigation buttons used to interface with the
RRS-4 control and their functions.
2.1 Main/Startup Screen
When the main power to the RRS-4 is turned on, the screen in Figure 1 will greet the
user. From this screen, the user can choose either of the two racking control options
offered on the RRS-4, as well as view CBS ArcSafe® contact information for any
questions they may have. The figure and descriptions below will detail the functions
available to the user from this screen.
Description:
1.
Power Indicator
– Informs the operator that the power is “ON”
2.
CCM Mode
– Selects motor current monitoring mode for the racking operation
3.
SEK Mode
– Selects motor revolution counting mode for the racking operation
Figure 1: Main startup screen
