VRC2100 Vending Reader
14
Installation Guide
- For CS Gold, set to 11 for the second VRC2100 in a chain,
12 for the next, and so on.
This is the multi-drop device address of the VRC2100 on CS Gold.
This number must match the setting in the
Physical Address
field of
CS Gold TPS Configuration for the node. Its range is
10
to
19
and
will roll over to
10
when
CHG
is pressed after address
19
is
reached. This setting has no impact on Odyssey.
Server:
Specify the following settings:
- For Odyssey, set to Odyssey.
- For CS Gold, set to CS Gold.
Encryption:
Specify the following settings:
- For Odyssey, set to
On
or
Off
, as needed, to match the Odyssey
server setting.
- For CS Gold, this setting does not appear. Encryption is
determined by the Location Configuration setting in the server.
Termination:
Specify the following settings:
- For Odyssey, this setting is irrelevant.
- For CS Gold, for a single VRC2100 not in a chain, this setting is
irrelevant.
- For CS Gold, for the first VRC2100 in a chain, select
On
.
- For CS Gold, for the subsequent VRC2100s in a chain other than
the last, select
Off
.
- For CS Gold, for the last VRC2100 in a chain, select
On
.
In a daisy-chain configuration (CS Gold only), termination must be
set to
ON
only for the Master and for the last Slave in the chain. Any
VRC2100s in the middle of a chain must have termination set to
OFF
.
Note:
For a single VRC2100 or for Odyssey platforms, this setting is
irrelevant.
PROX Sent as:
Specify the following settings:
When a VRC2100 is equipped with a contactless reader, the data
can be sent to the host in various ways. The simplest method is to
send the data from the contactless reader in "Raw Hexadecimal"
form; for example, FA5923C1. A CS Gold or Odyssey media rule
would need to be set up to map this hexadecimal number to the
matching user account.
- To send contactless card data in raw hexadecimal format, select
HEX
.
- To send contactless card data in formatted ASCII format, select
ASC
.
