VRC2100 Vending Reader
10
Installation Guide
3.5 Configure the XPORT for CS Gold
Use the following procedure to configure the XPORT for CS Gold. Only
Telnet Configuration settings are required:
1.
In the Lantronix
Device Installer
program, access the
Telnet
Configuration
tab. Once the XPORT connects to the Telnet session,
a blank page will appear. Click
Connect
and then quickly press the
[Enter] key when prompted with
Press Enter for Setup Mode
.
2.
Select
0 Server
and enter the following settings for CS Gold. The IP
address, Gateway IP address, and Netmask must be assigned by your
network administrator:
IP Address: Enter the IP address.
Set Gateway IP Address: Enter the Gateway IP address.
Netmask: Number of Bits for Host Part (0=default) (10)
Set DNS Server IP addr (N) ?
Change Telnet/Web Manager password (N) ?
3.
Select
1 (Channel 1)
and enter the following settings for CS Gold:
Baudrate (9600) ?
I/FMode(4C)?
Flow(00)?
Port No (901) ?
ConnectMode (C0) ?
Send ’+++’ In Modem Mode (N) ?
Show IP addr after ’RING’ (N) ?
Auto increment source port (Disabled) ?
Remote IP Address: Set to zero for CS Gold.
Remote Port (901) ? Set to zero for CS Gold.
DisConnMode (00) ?
FlushMode (77) ?
Pack Cntrl (00) ?
DisConnTime (00:00) ?
SendChar 1 (00) ?
SendChar 2 (00) ?
4.
Enter
9
to save your settings and exit. The XPORT will be rebooted
and will start operating.
