9
Item
Description
2
LAN
1 2
Use any Ethernet port to connect an Ethernet-equipped computer, hub,
bridge, or switch using an RJ-45 cable.
Activity LED - Green LED defines the activity of the Ethernet connector.
When LED is ON, this indicates that there is no data traffic and a
connection is stabilized.
When LED is FLASHING, this indicates that there is data being
transmitted upstream or downstream.
When LED is OFF, this indicates that the unit is not powered or there is no
Ethernet connection.
3
RESET
Press and hold the RESET button for five seconds or longer to restore
CH7284E to factory default settings. After factory default settings are
restored, the gateway will restart and may take 5 to 30 minutes to find and
lock on the appropriate communication channels.
4
COAX
Connect the CH7284E to a cable wall outlet.
5
POWER
SWITCH
Switch gear for power on/off the CH7284E.
6
POWER
Provide power to the CH7284E.
MAC Label
The CH7284E Media Access Control (MAC) label is located on the bottom of the
CH7284E. The label contains the MAC address which is a unique, 48-bit value that
identifies each Ethernet network device. To receive data service, you will need to provide
the MAC address marked HFC MAC ID to your Internet Service provider.”
Note: Label may differ according to local settings or requirements.
