C.B.M. S.r.l. a socio unico - Medical Equipment –
Via Castello 10, 26038 Torre dé Picenardi (CR) - Italy
Rev. 06 – 18/02/2019
Manuale SST1700-2200 r06 CE-1282 EN
page 11 of 34
Tips:
♦
It is appropriate to provide for an adequate supply of demineralised water.
♦
Ensure that the hosepipe in the container is always in the water during filling.
6.
When loading is completed the display shows the operation end, press STOP and
ESC to go back to the main pages
7.
Disconnect the hosepipe by pressing the Blue button on the pipe-fitting and pulling
the coupling slightly.
8.
Door closing: After having introduced the material to be sterilized, close the door to
its limit, then press the DOOR LOCK key, the icon DOOR LOCKED will
appear on the display.
9.
Select the desired cycle by pressing the relevant icon (example
), see also the
cycles Table on page 21.
10.
Press the DRYING
key and select the drying cycle desired, also shown in the
information bar.
11.
After having selected the DRYING cycle,
press the START key.
12.
From this moment the door is fully locked and the appliance operates automatically
until the end of the cycle.
13.
The display constantly indicates the following, among others: TEMPERATURE –
PRESSURE –SELECTED CYCLE –CYCLE PHASE.
14.
If the cycle is completed successfully the appliance warns of the END of cycle
through sound impulses and the writing CYCLE COMPLETED on the display.
15.
Upon completion of the cycle press the ENTER
key. It is now possible to
open the door by pressing the OPEN DOOR
key.
