21
Disclaimer
Clients CANNOT ask to be relieved from liabilities by considering they have no responsibility in the following
cases: the request violates safety rules; in the event of negligence or wilful non-fulfilment; in the event of
gross negligence of the operator.
NO exception to liability deriving from incorrect interpretation or negligence in relation to the described
instructions is allowed.
If for any logic and legitimate reason, one or several operators are not willing to take on the liabilities deriving
from safe use of the product, they must not use it and contact the Manufacturer for any clarifications and, if
possible, solve any problems or queries there may be.
The Manufacturer does not accept any disclaimer or relief of responsibility by the Client unless this is fully
justified and motivated.
Support and Requests for spare parts
All services involved in support and requests for space parts are managed by the SERVICE centres of the
Manufacturer or an agent appointed by the latter, as specified on the cover of this manual.
Only use original spare parts to benefit from the warranty conditions.
We recommend always having a series of bearings in stock.
To request spare parts, report all the available data located on the plates or on the components:
- Machine model
- Serial number and year of manufacture
- Description of the part
- Desired amount
- For electrical material specify the voltage (Volt) and frequency (Hz).
Predictive maintenance
Predictive maintenance is a kind of preventive maintenance that can be carried out by the Manufacturer
upon request. It consists in calculating and checking the residual time or efficiency of the components based
on the data detected after a certain operating time of the product.
The following issues usually arise during use:
- the components are affected by wear, thereby increasing their friction. They produce more heat, noise or vibrations;
- the electric cables are loosened due to vibrations and as a result produce Joules, short circuits and overheating;
- due to the effect of vibrations, the bolts are loosened and as a result noise levels increase;
- the lubricants dry or evaporate, thereby not performing their function properly.
The Manufacturer can intervene upon requests with an analysis of the product to
prevent any anomalies or failures.
To make the diagnostic easier, while the product is operating the Client must note down maintenance work
and/or problems detected (see
“Table: Work performed”
).
OBLIGATIONS AND LIABILITy
The ENCLOSED documentation is intede for qualified
professionals.
The information in the manual is partly taken from different
suppliers' original documents.
Before activating and using the product, check if all the
enclosed documents required for its installation, operation
and maintenance are in place.
A
nnexes:
Summary of Contents for CH Series
Page 23: ...22 Table Work performed Item Pos Type of job and or Notes Date Operator signa ture Annexes ...
Page 24: ...23 Table Work performed Item Pos Type of job and or Notes Date Operator signa ture Annexes ...
Page 25: ...24 Table Work performed Item Pos Type of job and or Notes Date Operator signa ture Annexes ...
