GB
E
N
G
L
IS
H
GB
6
DESCRIPTION
The burglar alarm manages the perimeter control using contacts on openings (storage and doors) and the
internal control using volumetric sensors.
When the burglar alarm is switched on, the system quickly scans all the entrances to check for alarm
situations and anomalies (such as an open storage door), with the exception of the volumetric sensors. If
activation fails, the system signals this by flashing the turn signal lights five times.
In the absence of anomalies the system switches to stand-by for approximately 60 seconds (dashboard led
flashes), and in this period any alarms/anomalies are ignored; after another 60 seconds the burglar alarm
system turns on (dashboard led permanently on).
IN THE CASE OF AN ALARM...
When an alarm appears the system signals this both acoustically and by flashing lights.
The turn signals light for one second every two seconds, for maximum 30 seconds.
There can be up to 10 alarms, which reset when the burglar alarm is switched off.
The horns blow intermittently for one second every two seconds, for maximum 30 seconds.
There can be up to 10 alarms, which reset when the burglar alarm is switched off.
To turn off the burglar alarm system after an alarm, press one of the two buttons on the remote control.
Five short flashes and five short beeps will indicate, when the burglar alarm is switched off, that there has
been an alarm.
Summary of Contents for MODULO ANTIFURTO
Page 2: ......
