30
2. Change Camera ID
2. Change Camera ID
This command is to change the camera ID number which is connected as New ID number or
Enable or Disable a "Camera ID Number Check Mode".
Control Command
[C5h] [78h] [New Camera ID] [Check Mode] [Camera ID] [Check Sum]
Return Data
[C5h] [78h] [New Camera ID] [Check Mode] [New Camera ID] [XXh] [XXh] [XXh] [Check Sum]
Parameter Description
* Camera ID
-> Assigned Camera ID that is controlled by remote.
* New Camera ID -> New ID that you try to change.
Possible ID change range is from "0d(00h)" to "255d(FFh)".
* Check Mode
-> Setup On/Off of camera ID number inspection in case of remote controlling.
Check Mode
Description
00h
Set the camera to "Camera ID Number Check Off Mode". Here the new camera
ID will be ignored.
Other Values
Set the camera to "Camera ID Number Check On Mode". Here the camera ID
is changed to New Camera ID.
