11
PUSH
FOCUS MODE SET
2-4. ZOOM END Set:
This function is for selection of zoom end position.
A) Select the “ZOOM END” in submenu using Tele/wide key.
B) Set the Zoom end mode from (Zoom Start + 1) x 270 to X using
Focus key.
2-5. ZOOM SPEED Set:
This function is for selection of zoom speed.
A) Select the “ZOOM SPEED” in submenu using Tele/wide key.
B) Set the Zoom speed, Slow, Middle , Quick using Focus key.
2-6. ZOOM TRACKING MODE Set:
This function is for selection of zoom tracking mode.
A) Select the “ZTRK” in submenu using Tele/wide Command, B) Set
the Zoom tracking mode to Auto or Manual.
* Zoom tracking means focused zooming state.
2-7. INITIAL SET:
If initial mode set to ON, All FOCUS SET function is
changed to the factory setting.
A) Select the “INITIAL SET” in submenu using Tele/wide key. B) Set
the initial set mode to ON or OFF using Focus key.
2-8. RETURN TO MAIN MENU:
This function is exit to main menu.
A) Select the “RETURN” in submenu using Tele/wide key. B) Set the
return mode using Focus key.
