CBC Ganz ZCA-SC Series, User Manual

Page: 23 / 30

22
When the user presses the key, a PTZ flag will be displayed in the top right
corner of the screen.
In PTZ control mode, use the playback, replay, FF and RW keys to control the
PTZ camera pan and tilt.
7.18 Lens Control in DVR Control Mode
The user can control the functions of the lens using the lens control keys in PTZ
mode.
•
Zoom Function
< Tele >: Press to zoom the lens in.
< Wide >: Press to zoom the lens out.
•
Focus Function
Press the focus keys to adjust the focus of the lens in manual focus mode.
< Focus Near >: Press to move the lens focus closer.
< Focus Far >: Press to move the lens focus further away.
7.19 Auto Focus
When the user switches to DVR control mode, the auto focus LED will be turned
off immediately. Press this function key after manually adjusting the camera
lens to bring the image back into focus.
7.20 Auto Sequence
In DVR control mode, press this key to execute the defined sequence of monitor
displays.
7.21 Run Sequence
In PTZ mode, the user can execute the first sequence line set on the PTZ
camera. The function is similar to TOUR on the DVR front panel.