CBC Ganz ZCA-SC Series, User Manual

Page: 18 / 30

17
■ Executing Sequence Function
Press < 1 > and < RUN SEQ. > to execute the first sequence line defined in the
OSD; the first 4 sequence lines can be executed directly from the keyboard. To
set the other sequence lines, complete the setup and execute them in the OSD
menu.
xxx Ganz PT Camera
Running Sequence 1
6.5 Auto-pan
In Camera Control mode, the user can control the built-in auto-pan function on the
ZC-PT2XX. Follow the instructions below to manipulate this function.
■ Setting Auto Pan Function
Up to 4 auto-pan lines can be set up in the OSD menu. Press < CAMERA
MENU > to enter the OSD setup menu and set up the auto-pan lines as
described in the camera operating instructions. The auto-pan setup menu for
the PTZ camera is as shown below.
Only the first auto-pan line can be set directly from the control keyboard; press
<
AUTO PAN > and select < 2 > to configure.
3.0 Autopan Select
1.Run 2.Setting
■ Execute Auto-Pan function
The first auto-pan line can be executed directly from the keyboard; the other
three can be executed using the OSD menu. Press <
AUTO PAN > and then
< 1 > to execute the first auto-pan line defined in the OSD menu.
3.0 Autopan Select
1.Run 2.Setting
xxx Ganz PT Camera
Running Auto Pan…
AUTOPAN
AUTOPAN LINE 1
START POINT TO FIND
END POINT TO FIND
DIRECTION RIGHT
SPEED
1
RUN AUTOPAN ENTER
EXIT YES