www.cayken.com.cn
www.cayken.com.cn
13
14
C
AYKEN
PROFESSIONAL DRILLING
C
AYKEN
PROFESSIONAL DRILLING
While drilling on top surface, we also need two operators, and one guardian as well. Try not
to drill on this way. While choosing this way, take some corresponding protection consider the
fastness and the scrap iron. As to other ways, operators can use flexibly according to the situat-
ion. But do consider the safety.
This tool should be properly grounded in order to avoid the shock Grounding device
should have the lead standard and a grounding plug with earthing special line Do not be
ground false joint in the line of fire or three phase line Grounded power receptacle should
be connected withthe earthing device is connected to the eternal so that it can work with
yellow green wire connected to the plug hole and connection piece at the same time and
ground connection
,
.
,
.
-
.
,
.
SPECIFICATIONS
GROUNDING DEVICE
SPECIFICATIONS
APPLICATION
While drilling on horizontal level, move the machine to the workpiece, then plug in. Turn on
the magnetic control switch, fit on the bit after the magnetic base fixed firmly, and then rotate
the handle to move the bit to the workpiece. Turn on the motor switch to drill. Keep the load
around 0.05mm/r. Do not overexert in case of overload.
While drilling on the side face, we need two operators, and one guardian as well. Move the
machine to the workpiece, then plug in. Turn on the magnetic control switch until the magnetic
base fixed firmly(the operator need to hold the machine during this period), and then fasten
the safe belt in case of sudden dropping. Fit on the bit, rotate the handle to move the bit to
the workpiece and then turn on the motor switch to drill. Keep the load around 0.05mm/r.
Do not overexert in case of overload.
9.Should be filled with cooling water or cooling liquid using hollow drill turn on the tap and let
it flow out slowly
,
,
.
Notice In order to constantly improve products, our company reserves the
right to change technical data without prior inform.
:
Tool Holder
mm
Kg
rpm
N
W
V
Hz
mm
13 drill chuck
#
2#
16#drill chuck
3#
140
180
160
190
9 5
.
25
15
28
Specifications
Max.hole diameter
Rated voltage
Rated input power
Stroke
Rated frequency
Max.attraction
Arbor
No-load speed
Weight
13
23
16
28
50-60
50-60
50-60
50-60
110/220~
110/220~
110/220~
110/220~
9500
14000
11500
14800
1250
1500
1480
1780
SCY 1300
SCY 1300E
SCY 1300RE
-
-
-
SCY 2300
SCY 2300E
SCY 2300RE
-
-
-
SCY 1600
SCY 1600E
SCY 1600RE
-
-
-
SCY 2800
SCY 2800E
SCY 2800RE
-
-
-
※Models with RE have the function of positive and negative rotation.
※Models with RE have the function of positive and negative rotation.
4#
4#
5#
4#
5#
5#
200
200
250
210
210
350
32
49
80
38
60
100
50-60
50-60
50-60
50-60
50-60
50-60
380~
380~
380~
380~
380~
380~
16800
18000
25000
17000
23000
25500
2100
2500
2800
2300
2700
3180
SCY 3200
SCY 3200C
SCY 3200RC
-
-
-
SCY 3200RTC
-
SCY 3800
SCY 3800C
SCY 3800RC
-
-
-
SCY 3800RTC
-
SCY 4900
SCY 4900C
SCY 4900RC
-
-
-
SCY 4900RTC
-
SCY 6000
SCY 6000C
SCY 6000RC
-
-
-
SCY 6000RTC
-
SCY 8000
SCY 8000C
SCY 8000RC
-
-
-
SCY 8000RTC
-
SCY 100
SCY 100C
SCY 100RC
-
-
-
SCY 100RTC
-
Tool Holder
mm
Kg
rpm
N
W
V
Hz
mm
Specifications
Max.hole diameter
Rated voltage
Rated input power
Stroke
Rated frequency
Max.attraction
Arbor
No-load speed
Weight
Notice In order to constantly improve products, our company reserves the
right to change technical data without prior inform.
:
※Models with RC and RTC have the function of positive and negative rotation.
※Models with RC and RTC have the function of positive and negative rotation.
600
600
0 600
-
330
330
0 330
-
500
500
0 500
-
300
300
0 300
-
41/42/42/43
42/43/43/44
56/57/57/58
42/43/43 44
/
43/44/44/45
58/59/59/60
280
150-280
150 280
95 188 235
-
-
-
220
120-220
120 220
68 140 210
-
-
-
200
100-200
100 200
50 100 115
-
-
-
250
135-250
135 250
75 135 220
-
-
-
210
105-210
105 210
66 132 195
-
-
-
108
45-108
45 108
45 90 108
-
-
-
