To prevent electric shock or fire please strictly abide by the procedures in the
operation manual
The machine only for the specialized persons please do not let other people to
operate If any violation of the instructions operation and cause personal injury
or machine damage our company disclaim all responsibility
The machine can only maintain by the people who has the certification
,
.
,
.
,
.
.
WARNING
THANKS TO YOU BUYER
ABOUT THIS MANUAL
SCY: 1300/1300E/1300RE/1600/1600E/1600RE
SCY: 2300/2300E/2300RE/2800/2800E/2800RE
SCY: 3200/3200C/3200RC/3200RTC/3800/3800C/3800RC/3800RTC
SCY: 4900/4900C/4900RC/4900RTC/6000/6000C/6000RC/6000RTC
SCY: 8000/8000C/8000RC/8000RTC/1000/1000C/1000RC/1000RTC
Magnetic Drill
Magnetic Drill
Magnetic Drill
Magnetic Drill
3 Phase Magnetic Drill
-
3 Phase Magnetic Drill
-
3 Phase Magnetic Drill
-
3 Phase Magnetic Drill
-
3 Phase Magnetic Drill
-
3 Phase Magnetic Drill
-
C
AYKEN
Operation Manual
Great thanks for buying the series of diamond drill of
Please read
operation manual and must pay attention to safety precaution
The right operation will make you fully feel our products superior performance
Please put this manual in a safe place for future reference
.
.
,
.
.
The machine model of the description in this manual:
The machine model of the description in this manual:
Confirm the machine model according to the nameplate.
Shanghai Chengxiang Electromechanical Equipment
Co., Ltd. reserves the rights of final explanation.
www.cayken.com.cn
www.cayken.com.cn
9
10
C
AYKEN
PROFESSIONAL DRILLING
DESCRIPTIONS OF PRODUCTS
CAUTIONS
Warning: magnetic drill equipped with a safety rope, when operating, make sure the magnetic
drill and the object is fastened by the rope.In case of power failure suddenly, causing
the machine fall off or thrown objects and cause accidents.
,
,
,
,
.
.
,
,
,
.
Magnetic drill is a kind of electric tool for adhering and drilling on the horizontal level side
face and top face and widely used in the building bridge building and ship building industries
and so on You can use the magnetic drill when you can not use drill press and electric hand
drill to drill huge steel workpieces or in field operation It’s very convenient to use flexible
can reduce labor intensity improve the machining precision and work efficiency
1 Please read the manual carefully before use to understand the magnetic base drill structure;
electromagnetic sucker electric drill and transmission functions
2 Before installing or remove the drill must confirm the motor switch is closed and the plug
3 Using a drill bit after clamping key wrench must be removed while the drill must be sharp
for Morse taper shank drill should pay attention to the flat iron tail at the cone sleeve waist
groove insert cone sleeve Remove the drill the inclined flat iron is inserted on the oblique
iron just bit dropping hammer sleeve waist groove
4 And its operation must be put in the fuselage behind the cable away from the drill bit
5 In the switching power supply electric and magnetic switch must be in the off position
6 Drilling machine must be used when using engine coolant The use of cooling liquid soap
according to the ratio of Duishui absolutely can not direct water cooling Otherwise very
easy to damage and the main internal rust on the drill bit can t get it out No internal mach
ine water otherwise it will burn the circuit board
7 Such as the use of the stepless speed regulation models of constant power overload prote
ction the machine during use motor suddenly stop functioning then in the function of over
load protection device the steps are as follows A turn off the power switch paused for a few
minutes; B weight of the plug then open the motor
8 The use of magnetic base drill must wear a seat belt buckle
9 No rough operation personnel feed can not handle in order to work fast and pressed down
the machine feed so lossy bit and machine
10 Non magnetic materials can not drill with magnetic base if the non magnetic material
punching need to choose the magnetic base drill with sucker
11 Cannot use at the same time electric welding machine and magnetic base drill on the same
piece of steel plate so that the operating personnel from electric shock danger
.
,
,
.
.
.
.
,
,
,
.
,
.
.
,
.
,
.
.
(
)
,
.
,
'
.
-
,
.
.
,
,
,
,
: ,
,
,
,
.
.
,
.
.
,
,
.
-
,
-
.
.
,
,
.