113
SMP-PRO SERIES USER MANUAL
If you encounter any unrecoverable problem (e.g. unable to
boot up) while using SMP client, you can choose this function,
System Recovery, to restore your system firmware to factory
default. Follow the steps below to recover the system:
1. Start or Restart the SMP system with keyboard connected to
the box.
2. Keep press the TAB key while power on until the boot loader
menu appear (cayinos & recovery).
3. Enter “
recovery
”, and press “
enter
”. If you want to recover
the system without answering questions, you can enter
“
recovery automatic
”. The program will skip step 5 & 6.
4. While the recovery system boots up, follow the instructions.
5. When the instruction “
The system will recover to
factory default.
” is shown, please type “
Y
”. Then the
system firmware will be restored to the original one, i.e. you
have to upload all patches again after the system recovery.
6. When the instruction “
The configuration will recover
to factory default.
” is shown, you can choose to type “
Y
”
and SMP will restore the configuration to the original one. You
will lose all configurations which you made on this box, and
you will be prompt to enter a new key for this box when you
restart the system again. The key label is stuck behind the
SMP device.
7. When the instruction “
The resource will recover to
factory default.
” is shown, you can choose to type “
Y
”
and SMP will restore all the resource to the original default
setting.
8. Press Enter to reboot.
You can try to recover the
system firmware first, and
type “
N
” for the configuration
recovery. If it works for you,
all configurations will be kept
after system is restored. If it
doesn’t work, you can enter
system recovery function
again, and type “
Y
” in the
configuration option.
