EN-5
Installing handle and reversing the door
3. Install handle to the door frame of the appliance.
The handle is delivered in a separated package
with screws together inside the carton.
①
Reveal two small holes on the door frame
from inner side by pulling out a bit the door seal
②
Aim the handle to the holes and insert the
screws from inside
③
Screw them up with
screw-driver
④
Put back door seal to cover the
screws.
4. Reversing the door
Our wine fridge is delivered with the door opening from left to right. To reverse the
opening direction:
Open the door at 135 degrees and keep it steady. (be careful that the door is tall &
heavy)
Unscrew the four screws
②
from the lower hinge
①
[Figure 1].
Pull the door outwards slowly [follow the arrowhead direction in Figure 1] to get off
the lower hinge
①
and continue to pull the door downwards slowly until getting off
from the top right hinge, and unscrew the two screws
④
to take off the lower hinge
plate
⑤
from the door [Figure 2].
Screw top right hinge
⑦
off from the cabinet and keep it in the polybag for needs if
you want to change back left opening door in the future.[Figure 3]
Install the top left hinge
⑥
& the lower hinge
①
to the left side of the cabinet. (
⑥
is delivered in a separated polybag inside the packing carton).[Figure 3]
