7
Touch panel temperature setting:
1. Press and hold to turn the Power ON and OFF
2. Press and hold (1) and (3) simultaneously to Unlock and Lock the Control Panel.
3. Turns the Interior Light ON and OFF
4. Displays the Temperature
5. Increases Set Temperature 1°C/1°F with Each Push
6. Decreases Set Temperature 1°C/1°F with Each Push
7. Press and hold (5) and (6) simultaneously to alter the temperature display to
Fahrenheit or Celsius.
Getting Started
Unpacking
•
This product has been packaged to protect it against transportation damage.
Remove all packaging materials from around and inside the appliance, but do not
remove any foam insulation surrounding the pipes at the back. Keep the original
packaging carton and materials in a safe place; it will help prevent any damage if
the product needs to be transported in the future, and you can use it to store the
appliance when it is not in use. In the event that the carton is to be disposed of,
please recycle all packaging materials where possible.
•
Plastic wrapping can be a suffocation hazard for babies and young children, so
ensure all packaging materials are out of their reach and disposed of safely.
•
Parts: Check to ensure you have all the parts pictured on the previous page spread.
•
Unwind the power cord to its full length and inspect it for damage. Do not use the
appliance if the appliance or its cord have been damaged or are not working
properly.
In case of damage, contact our atter sales support line for advice on
examination, repair or return of the damaged product.
•
Make sure the refrigerator is disconnected from the power supply before cleaning
the interior surfaces and all internal accessories with lukewarm water, a soft cloth
and a neutral/mild soap/detergent. This will remove any dust from transit and
storage and help remove the typical smell of a brand new product. Then dry
thoroughly. Important: do not use harsh or abrasive detergents or powders as these
will damage the finish.
