CAVE-TEK TeamUp P20 Camera User Guide
18
1)
LAN Settings
Default the IP address is 192.168.100.88, the MAC address can not be modified.
2)
Port Settings
A.
HTTP Port
The port setting is to set up a web server program using which port to transmit. When port mapping, need
to be consistent with the port number (default port: 80).
B.
RTSP Port
Network camera support RTSP protocol, use the VLC tools broadcast.
C.
PTZ Port
Support PTZ protocol, default port: 5678.
3)
Control Protocol Settings
Setting the camera control communication protocol, include Visca address, Pelco-D address, and Pelco-P
address.
4)
RTMP Settings
Setting the MRL of RTMP, select enable or disable video and audio. You can select the control code stream
of "On", "Off", "Video", "Audio" between in the two streams.
5)
RTSP Settings
Turn On/Off RTSP auth.
6)
ONVIF Settings
Turn On/Off ONVIF and ONVIF auth.
7)
Multicast Settings
Turn On/Off multicast. Setting the multicast address (default value is 224.1.2.3) and port (default value is
6688, then 6688 is the multicast port of the first stream; 6690 is the multicast port of the second stream).
8)
SDK Settings
Turn On/Off active connection. Setting SDK address (default value is 192.168.100.138) and port (default
value is 1234).
9)
NTP Settings
Turn On/Off NTP time sync, main time show and sub time show. Setting NTP server address, time interval,
primary stream position and sub stream part.
5.5.7
Device Information
Display the current device information, as shown below.
V1.1_20210420
