CAVE-TEK TeamUp P20 Camera User Guide
8
4.8
COMMUNICATION SETUP
Move the main menu cursor to [COMMUNICATION SETUP], and press [HOME] key enter the
communication setup page, as shown in the following figure.
COMMUNICATION SETUP
Protocol
VISCA
V_Address
1
V_AddrFix
Off
Net Mode
Serial
Baudrate
9600
Select Item
Change Value
[Menu] Back
Protocol:
Control protocol type, Auto, VISCA, PELCO-D, PELCO-P.
V_Address:
1 ~ 7. (Effective only in Auto, VISCA protocol).
V_AddrFix:
On, Off (When set to On, useless in 88 30 01 FF Command).
P_D_Address:
0 ~ 254. (Effective only in PELCO-D protocol).
P_P_Address:
0 ~ 31. (Effective only in PELCO-P protocol).
Net Mode:
Set the serial port network control, Serial, Paral.
Baudrate:
Serial port baud rate, 2400, 4800, 9600, 38400.
4.9
RESTORE DEFAULT
Move the main menu cursor to [RESTORE DEFAULT], and press [HOME] key enter the restore default page,
as shown in the following figure.
RESTORE DEFAULT
Restore?
No
Change Value
[Home] OK
[Menu] Back
Restore: Confirm restore factory settings, Yes, No.
Note: Press [HOME] button to confirm, all parameter restore default, include IR Remote address and VISICA
address.
