INSTALL HANDLES
.
STRUCTURE
SET UP TEMPEREATURE
POSITIONING THE UNIT FOR AIR CIRCULATION
SHELVES AND INSIDE LIGHT
ENERGY FAILURE
In the inside you will find two handles and a small plastic bag with four screws and its plastic buttons to cover them.
After installing the wine dispenser, you can level it; it has got four levelling legs, two on the front and two at the
back of the appliance.
To level, turn them clockwise to raise the dispenser and counter clockwise to lower it.
The door will close much better if the four levelling legs are extended.
1. Temperature control
2. Light switch (on/off)
3. Light
4. Fan cover
5. Shelve
6. Leg
7. Water deposit
8. Joint
9. Magnetic closure
10. Glass
11. Door frame
12. Handle
Your wine cooler “CAVANOVA” CV0048 has two independent temperature compartments which are controlled with
the digital display.
The temperature range on the left side is between 8ºC and 18ºC and on the right side is 10ºC to 18ºC. These
temperatures are ideal either for red or for white wines, depending on the chosen temperature.
To bring up or to bring down the temperature, simply press “^ button upwards “ or “button – downwards”,
depending on your choice, when the desired temperature appears on the display stop pressing and that
temperature will be set up.
The display will always show the selected temperature until you set up a different one.
Your wine dispenser needs space around it to function properly. Ventilation at the back and on the sides of the
dispenser is very important. it should never be covered up. The back side should be placed 10 cm away from the
wall and at least 5 cm on each side.
The wine cooler should be positioned on a flat even ground.
The shelves are designed for the wine bottles to have air circulation so as to maintain wine at its maximum
freshness.
A soft cool light has been installed in the wine cooler. Slightly touch the light bulb button and the light will turn on,
touch it again and it will turn off. To obtain a lower energy consumption keep the light off.
Unplug the electric cord whenever there is an electric failure or there is no power supply. When the power supply is
re-established please plug again the electric cord to current electricity.
1
2
3
4
5
8
10
12
11
-7-
light
display
tempe
temperature -
pantone black pantone 194cv
