Page
12
of
16
Cut a slug of EPP from one site to the other so the battery fits in the centre line. It’s a good
idea to mark each side, left and right, so you can out the sides back the same way.
Cut the core of the EPP out so you are left with the 2 sides that can be glued back in.
Wire up the battery and check it all works before using Gorilla glue to put the 2 sides back
where they came from.
Glue 2 lengths of the left over 3mm carbon strip either side of the fuselage for rigidity and
hold down with fibre tape.
Summary of Contents for Slingshot RG20/900 DLG
Page 2: ...Page 2 of 16 ...
Page 6: ...Page 6 of 16 ...
Page 9: ...Page 9 of 16 ...
Page 14: ...Page 14 of 16 ...
