7
RAC16
User Guide
9M02-9029-A001-EN
Rev. 4
Programming
If the programmer is not already switched on, apply power on by pressing the
ON
button. The
display will show what device the programmer is connected to (OCU or MCU) for 5-seconds and
then will read and display the ID Code of the unit.
Note Relative to Configuration Changes
If you will be changing the configuration but retaining the existing ID Code
(Frequency and Address) you need to record the current value so it can be re-
programmed after the configuration has been changed.
Changing the ID Code
Enter the new 6-digit ID Code for the unit to be programmed. Verify the number on the LCD
display. If a mistake is made when entering the code, the
BKSP
/
ESC
key will reposition the cursor
to allow corrections.
ACTION
RAC16A DISPLAY
Enter the new 6-digit ID Code for the device being programmed.
ID CODE 28008C
After the new ID Code is entered, press
PRG
. (If an error
message is displayed, press
MENU
or
BKSP
/
ESC
to return to
the
TX CONNECTED
menu.)
SUCCESS!
Verify the new ID Code by connecting the RAC16A as explained above. The ID Code will appear
in the display.
