Excalibur
User Manual
39
9M02-7573-A001-EN
Version 3.0
10. Compliance
CE Declaration of Conformity
Hereby Cattron declares that the radio equipment is in compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following internet address:
RF Compliance
Information to the User regarding FCC Compliance:
•
Changes or modifications not expressly approved by the manufacturer shall void the user's authority to
operate the equipment.
•
This Class A digital apparatus complies with Industry-Canada ICES-003 standards.
•
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Note:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will be required to correct the interference at
his/her own expense.
OCUs have been approved to comply with both FCC Part 15 and Industry Canada RSS-210 applications
standards.
No United States of America FCC or Industry Canada license is required for operation of FCC Part 15 or RSS-210
MKU OCUs.
Unlicensed Bands
Unlicensed bands include the following:
•
902-928 MHz in the U.S.A. and Canada
•
433-434 MHz in the EU, Brazil, China and others
•
868 MHz in the EU
•
Other regions may differ based on National and regional rules.
Licensed Bands
Licensed bands include the following:
•
450-470 MHz in the U.S.A. and Canada
•
Other regions may differ based on National and regional rules.
Note:
If a licensed band is configured, no user frequency selection is available.
