-23-
WARNING: If you smell gas:
• Shut off gas to the appliance.
• Extinguish any open flames.
• If odor continues, immediately call your
gas supplier.
Before You Use Your Heater
1. Move heater to an open area.
2. Make sure tank valve is in its full off position
(turn clockwise to stop).
3. Never attempt to use any components that
have been damaged or exposed to an acciden-
tal fire.
The connection provided with this heater
incorporates two important features:
Temperature Activated Shutoff and Excess
Flow Control.
TO LIGHT
1. Open the main gas supply valve on LPG
cylinder.
2. Open manual valve.
3. Press and hold silver control valve button
for 3 seconds While holding valve button, press
red igniter button until the burner is lit (may
require pushing more than once}. Continue to
hold the heater control valve for 30 seconds
then release.
4. TO MATCH LIGHT: Insert flame into match
hole near burner. Press and hold control valve
button until flame is lit. Continue to hold valve
button for 30 seconds.
IMPORTANT:
Smoke and odor (not a gas odor) emission
may occur in the first 15 minutes of use. Run
heater at high setting for at least 15 minutes
to eliminate this problem.
A WARNING:
If you smell gas while in use, immediately
press and turn control knob to the OFF posi-
tion to shutdown heater.
TO SHUT DOWN
1. Shut off main gas supply.
2. Close manual valve.
3. Wait 5 minutes before relighting heater.
WARNING: If the flame goes out during ope-
ration of the heater, it is necessary to close
all gas valves! It has to wait 5 minutes before
re-running the heater.
OPERATION
Match Hole
Control Valve
Button
Ignitor
Button
Manual
valve
E
