-4-
�
Heater use:
1. Place the heater on firm and level surface.
2. Connect the heater to the 230V mains.
3. To switch device on, turn the ON / OFF switch
into ON position.
4. To switch device off, turn the ON / OFF switch
into OFF position.
Maintenance:
- Check and clean the device regularly.
- Check the power cord regularly.
- Re-tighten the stand screws in two weeks after
installing. Re-tighten every 3 months.
Cleaning:
- Unplug the power cord before cleaning.
- Make sure the device is cool.
- Clean the surface with a damp soft cloth. Soapy
water can be used for stubborn dirt.
- After cleaning, dry unit using a cloth.
Warning:
- Do not use water, alcohol, petrol, polishes,
brushes or coarse sponges for cleaning.
- Do not soak device in water.
- Allow device to dry-off before use.
- If dirt acumulates inside device, always have the
appliance cleaned by a qualified person, do not use
the appliance until then.
- If device, or the power cord is broken in any way,
do not use or repair the device yourself.
- Broken equipment and repairs must always be
entrusted to the dealer.
Device disposal:
Electrical appliances should not be disposed of with
municipal waste. According to Directive 2002/96 /
EC on Waste Electrical and Electronic Equipment
(WEEE / WEEE) and related national legislation,
electrical waste must be separated and recycled.
Recycling as an alternative to disposal: the owner of
the electrical equipment is obliged to return the
equipment to a collection point or to ensure its
proper recycling. Electrical waste can be disposed
of at a waste collection point operated in
accordance with the applicable national waste
directives. This does not apply to accessories
without electrical components.
Caution:
Hot surface,
do NOT touch
Caution:
Do NOT use
with an extension cord.
(power strip, extension cable)
