-2-
�
Device description:
The infrared heater contains a reflector heating
system (carbon halogen bulb), which ensures even
heat radiation.
Infrared heaters do not heat the air as such.
Infrared rays pass through the air freely and
become transformed into heat only upon impact on
the human body, objects, floors, walls, etc,.
Because you perceive the heat from the infrared
heater immediately after switching on, it is not
necessary to preheat the given room, as is the case
with other heating devices.
The infrared heater saves electricity compared to
traditional electric heaters.
The infrared heater is designed for local outdoor
heating, but must be protected from the rain.
Package contains a stand for securing the heater.
Device has built-in tilt protection. In case of tilting, or
falling, the device will switch off.
Technical data:
Power supply
230V ~ 50 / 60Hz
Power consumption
1000W
Protection class
IP44
Heating area
3m2
Dimensions
20x20x64cm
Weight
2.9 kg
Placement
floor stand
WARNING!
- The infrared heater is designed for safe
operation. However the installation,
maintenance and operation of the heater can be
dangerous.
- Following the below procedures will reduce
the risk of fire, electric shock, personal injury,
and reduce installation time to a minimum.
- Protect from rain and high humidity.
- Keep these instructions for future reference.
Package contents:
#
name
count
1
washer 20 x 2 mm
3x
2
screw M6 x 25 mm
3x
heater
1x
stand
1x
Assembly instructions:
Tools requiered:
Phillips screwdriver
Assembly procedure:
screw on floor stand using included screw and
washers.
Infrared heater
