MANUAL DE INSTRUCCIONES · MANUEL D’UTILISATEUR
ASSEMBLY PREPARATION · BEDIENUNGSANLEITUNG · MANUALE UTENTE
EN//
Installation Manual
Please check the local constructions code,
location and other requirements before
installation. Study this manual carefully because
it may carry essential information for an easy and
pleasant installation.
Assembly instructions:
Review all the instructions before you begin,
make sure that you follow the steps by order to
ensure a successful installation.
Location:
The shed shall be installed above a flat place
with good drainage system. The shed shall be
anchored to the floor to avoid accident caused by
strong wind.
The shed shall be installed on top of solid and
fixed base. If necessary, you can add a square
foundation to the floor to level up the shed. The
foundation is not included in this set. You can buy
it separately or build it yourself.
It is not recommended to install and use this metal
shed in places close to the beach.
Parts and Parts List:
Check to be sure that you have all the necessary
parts for your installation listed in page 20.
Please tear off the safety protection layer before
the assembly, note down the part number label if
needed
Tools you need:
Safety:
1. Install the shed during dry and calm weather.
Two o more persons are required for the
installation process.
2. Wear safety gloves, eye protection and long
sleeves during the assembly to prevent injury; be
careful with the sharp edge of some parts;
3. Children and pets are not allowed to be around
the construction site;
4. Do not put your total body weight on the roof of
the building. When using a step ladder make sure
it is safe and stable.
Care & Maintenance:
1. Keep the shed clean with soft cloth, use water
if necessary;
2. Keep the door tracks clear of dirt and stuff that
might damage the sliding door.
3. Clean the snow with necessary tools before
enter; heavy snow may cause collapse, please be
carefully before enter.
4 The shed is not design for living but for storage
purpose.
Summary of Contents for 62010003
Page 2: ......
Page 25: ...INFINITY 44 45 43 T P3 T P3 T P3 T P3 T P3 T B42 T P5 T B41 T B44...
Page 31: ......
Page 32: ......
