CatonCaster HD422 User Manual
4.2.25 Configuring Digital Audio Output
This menu allows the user to configure the digital audio outputs of the CatonCaster HD422. The number of
outputs available directly correlates with the number of audio services the unit is licensed to support. Up to
eight digital audio outputs are available.
4.2.26 PID Filter
If the PID/Service Filter license is enabled, the following menus and options will be available for
configuration. PID filtering will allow the user to create a new output TS by selecting and dragging one or
more services/PIDs from the incoming transport stream into the Selected Services/PIDs box or use the
currently decoded stream. The user can also configure a TS bitrate for each PID filtered stream and select
different table inclusion options.
Page of
64
107
www.catontechnology.com
July 2020 R1
Setting
Range
Description
Analog Output
1-4
Off
Audio 1-8
Assign
Audio 1-8
to an analog audio output for output.
Select
Off
to disable the analog output completely.
Level
-10-4
Level of the analog audio output in dBu.
Setting
Range
Description
Digital Output
1-8
Off
Audio 1-8 PCM
Audio 1-8 Pass-through
Assigning a
PCM
audio to a digital output will output the
decoded or downmixed two channel audio using the
settings defined in
Section
4.2.13. Assigning
Pass-
Through
to a digital output will output unprocessed
compressed audio. Selecting Off disables the digital
output completely.
