14
CARE AND CLEANING
WARNING!
Grinding the slicing
disc may only be
performed by
a professionally
trained staff
member of an
authorized service
centre. Under no
circumstances
should the slicing
disc be ground by
a user.
NOTE
The slicing disc is made of a highly
durable material. The grinding may
only be performed when the slicing
outcome is really poor, the cut is
irregular, the slice gets torn apart and
a great force must be applied to press
the food against the slicing disc.
Before starting the grinding process, make
sure that:
-
the rotary cut thickness control is set to 0,
-
the plug is inserted in your mains socket,
-
the appliance has been cleaned following
the above instructions.
GRINDING PROCEDURE
1. Loosen the grinding attachment screw.
2. Lift the attachment and turn it 180 ° to
position the slicing disc between the two
grinding wheels.
3. Tighten the grinding attachment fi xing
screw.
4. Insert the mains cord plug into a power
socket.
5. Press I to turn the appliance on. The
indicator will light. Wait for the slicing
disc to start turning.
6. Press and hold down the grinding wheel
button located above the grinding
attachment fi xing screw.
7. Leave the appliance in operation for
about 1 minute. When the grinding
wheel has stopped, check if edge has
been formed on the cutting disc rim.
8. If edge has been formed, press and hold
down the grinding wheel’s button now
located above the slicing disc hub. Leave
the appliance powered on for about
3 seconds. Then release both buttons.
Press the O button to turn the appliance
off and unplug the power cord from the
mains. Wait for the slicing disc to come to
a full standstill.
9. When done with the grinding, loosen
the grinding attachment screw, turn the
attachment back to its original position
and secure with the fi xing screw.
10. Wipe the grinding wheels and the slicing
disc with clean alcohol.
REPLACING THE SLICING DISC
The slicing disc may only be replaced if it
cannot be ground any more or if the distance
between the disc edge and the upper
protective cover is greater than 6 mm.
Please have the slicing disc replaced in an
authorized service centre.
STORAGE
Before storing, make sure that the appliance
is clean and dry. Store it in a well-ventilated
dry place out of reach of children and
animals.
