11
OPERATING YOUR FOOD SLICER FS 9010 / FS 9020
OPERATING YOUR FOOD SLICER FS 9010 / FS 9020
BEFORE FIRST USE
Before fi rst use, remove all packaging
and advertising labels / stickers from the
appliance. Check the appliance for damage.
Make sure that the rotary cut thickness
control is set to 0. Wipe the appliance with
a soft sponge slightly moistened in warm
water. Wipe dry using a clean wiping cloth.
WARNING!
Avoid contact with
slicing disc edge.
ASSEMBLING YOUR APPLIANCE
Place the appliance on a dry, fl at and stable
surface, such as a countertop.
Provide suffi
cient free space around the
appliance, at least 15cm on each side.
Insert the grinding attachment in the holder
and secure with screw. Attach the protective
cover to the sliding pressure plate using the
supplied screws. Depending on the model,
attach the handle.
WARNING!
Do not use the
appliance if the
sliding pressure
plate’s cover is not
installed.
Make sure that the slicing disc hub is
correctly attached and the slicing disc hub
fi xing screw is properly tightened.
The slicing disc hub fi xing screw is equipped
with a microswitch to turn the appliance off
automatically if released.
LEVELLING YOUR APPLIANCE
To ensure correct functioning of the
appliance, it’s important for you to check if
it’s levelled before each use.
1. Turn the cut thickness control to 0.
2. Check if the sliding pressure plate is
aligned with the slicing dics.
3. Level the appliance by screwing out/in
the antiskid feet.
4. As soon as the appliance is levelled,
it’s ready for use.
WARNING!
Never use the
appliance if it’s not
levelled.
CHECKING BEFORE USE
Check if the rotary cut thickness control is
set to 0.
Fully unwind the power cord and connect
the power cord plug in the mains socket.
Press I to turn the appliance on. The red
indicator will light and the slicing disk will
start turning. Please check if the slicing disk
is turning regularly and the motor is running
smoothly. Press the O button to turn the
appliance off and wait until the slicing disk
has come to a stop.
If no malfunction is noticed, the appliance is
ready for use.
