SCTV Clock Assembly Manual
1/24/22
23
CRT wiring
The CRT fits through the front hole and is held in place at the rear by the round clamp. It must be
rotated correctly to display the time right side up, with pin 1 down.
Pass the CRT socket wires through the hole in the rear face of the case.
Plug the 6-pin Molex plug into J2 on the PC board.
Plug the 5-pin Molex plug into J4 on the PC board.
The wires will reside in the notch on the side of the hole after the clamp ring is installed in the next step.
