Cateye PADRONE DIGITAL CC-PA400B, Manual, Page: 45 / 50

Cover,
Introduction
3
SET
4
1
5
2
Using the app
Using the unit
Appendix
3/8
45
Replacing the battery
•
PADRONE DIGITAL
When
(battery icon) is displayed
on the screen, it is time to replace the
battery. Install a new lithium battery
(CR2032) with the (+) side facing
upward.
* After replacing the battery, always press
only the AC button to restart the unit.
The total distance value and the setting
values will be maintained.
•
Speed/Cadence sensor (ISC-12)
If the current speed or cadence display of the
PADRONE DIGITAL starts flashing, it is time to
replace the battery. Install a new lithium battery
(CR2032) so that the (+) side is visible, and then
close the battery cover securely.
* After replacing the battery, always press the
RESET button on the back of the unit and adjust
the position of the sensor relative to the magnet
according to
“Mounting the speed/cadence
sensor (ISC-12)” (Page 5)
* For details about how to perform operations such as mounting CATEYE sensors and
pairing, see the sensor’s online manual (on our website).
CR2032
COIN
Press RESET .
AC AC
COIN
CR2032
Restart operation
Appendix
Open
Open
Close
Close