Cateye PADRONE DIGITAL CC-PA400B, Manual

Page: 30 / 50

Cover,
Introduction
3
SET
4
1
2
Using the app
Using the unit
Appendix
1/11
5
30
By connecting the PADRONE DIGITAL to the Cateye Cycling™ app, the measurement data
can be managed and PADRONE DIGITAL settings changed from the smartphone.
To connect to a smartphone, install Cateye Cycling™ app and perform pairing with
PADRONE DIGITAL.
For instructions on installing/pairing with Cateye Cycling™ app, refer to procedures 1 to
5 in “Setup with a Cateye Cycling™ app” (Page 13) .
The following can be performed on the Cateye Cycling™ app.
Please select the desired item.
•
Importing measurement results to a smartphone (Page 31)
•
Check/upload the imported measurement results. (Page 33)
•
Account settings (Page 34)
•
Changing the measurement unit (km/h or mph) (Page 35)
•
Measurement screen customization (Page 36)
•
Input the total distance (Page 37)
•
Adding a new CATEYE sensor (Page 38)
•
Changing CATEYE sensor tire circumference values (Page 40)
* Restart Cateye Cycling™ app if a connection between a paired PADRONE DIGITAL
cannot connect with the Cateye Cycling™ app.
If this does not resolve the issue, restart your smartphone.
Capabilities with a smartphone