5
UK
Cooking using the Temperature Function
Press the FUNCTION button until the Temp light illuminates. Temperature can be adjusted by “ ” or “ ”.
Temperature is from 60°C to 240°C.
Function
Level
Increments
Default
Temperature
60°C - 240°C
20°C
180°C
Using the timer
When in Power or Temperature mode pressing the FUNCTION button again will allow you to enter / view
the timer.
The Timer can be adjusted by “ ” or “ ” from 0-180 minutes. Five seconds later, the screen will
automatically return to the function mode.
Function
Level
Increments
Default
Timer
0 - 180min
5min
0min
NOTE: If unsuitable cookware or no cookware is present the induction cooker will beep for
60 seconds before switching off.
Cleaning, Care & Maintenance
• Disconnect from the power supply and allow the appliance to cool before cleaning.
• Use warm, soapy water and a damp cloth to clean the appliance.
• DO NOT use abrasive cleaners or pads.
• Dry thoroughly after cleaning.
• A CATERLITE dealer or qualified technician should carry out repairs if required.
Troubleshooting
Fault
Probable Cause
Solution
The unit is not working The unit is not switched on
Check the unit is plugged in correctly and
switched on
Plug and lead are damaged Call Caterlite agent or qualified technician
Fuse in the plug has blown
Replace the plug fuse
Power supply
Check power supply
“E0” on Display
Unsuitable cookware / no
cookware
Replace with suitable cookware
“E1” on Display
Appliance has overheated
Check ventilation slots for blockages. Allow to
cool before attempting to use again.
“E2” on Display
Temperature of pan is too
high (Pan is dry or empty)
Remove cookware. Allow to cool before
attempting to use again.
CN203_ML_A5_v3_20181031.indb 5
2018/10/31 11:15
