688215 en ma 2017
7
COUNTERTOP INSTALLATION.
Remove all packing material and accessories. Examine the oven for any damage such as dents or broken
door. Do not install if oven is damaged.
Cabinet:
Remove any protective film found on the microwave oven cabinet surface.
INSTALLATION
1. Select a level surface that provide enough open space for the intake and/or outlet vents.
OPEN
10cm
10cm
30cm
A 10-cm spacing should be kept between the appliance and right and back walls, and a 30-cm spacing
kept on the top. Never dismantle the appliance’s feet, nor block the air intake and exhaust opening.
The left side must be open
1. Blocking the intake and/or outlet openings can damage the oven.
2. Place the oven as far away from radios and TV as possible.
Operation of microwave oven may cause interference to your radio or TV reception.
3. Plug your oven into a standard household outlet. Be sure the voltage and the frequency is the same as
the voltage and the frequency on the rating label.
4. Warning: The plug socket,electric appliances or the appliance which are liable effected by heat and
moisture should be kept away from any vents on the oven.
2. The applicance can be installed with a degree of overlap (Figure2).
The maximum overlap height is two layers
A. loosening screw,Taking off installation board, then replacing screw in its place tightly.
B. taking off four screws as shown in the picture.
C. putting installation board to the following location then fixing screw just taking off tightly
A
B
C
