background image

 

688215 en ma 2017

11

Appendix. B Default Cook Times

The oven shall ship with the following Preset Cook Times unless otherwise noted in the product  

specification.

Button

Display (Time)

Power

Cook Factors

1

0:10

100%

80%

2

0:20

100%

80%

3

0:30

100%

80%

4

0:45

100%

80%

5

1:00

100%

80%

6

1:30

100%

80%

7

2:00

100%

80%

8

3:00

100%

80%

9

4:00

100%

80%

0

5:00

100%

80%

1. POWER UP

"

_— __

" displays when the oven is electrified for the first time. If 

 button pressed,  

the oven will change to idle mode.

For some model:

"230V TOUCH 1 208V TOUCH 2" displays when the oven is electrified for the first time.
Press number buttons "1" or "2" to choose, the screen will alternate display "230V" or "208V",  
rolling display "TOUCH START", press 

 button, the oven will change to idle mode.

Note: Under idle mode, no button can be pressed.

2. IDLE MODE

1. Entry. The oven shall enter idle mode after a set of seconds have expired in Ready Mode without a 

 keyboard press or a door open and close. The number of seconds is determined by the keyboard 
 Timeout Window, set by User Option 4.

2. During idle mode, LED is blank. And there shall be no oven activity.
3. Opening and then closing the oven door, the oven will exit the idle mode and into ready mode.

3. READY MODE

1. In this mode, the oven is ready to either begin a manual or preset cook cycle. 
2. Opening and closing the door while the oven is in Idle Mode will put the oven into Ready Mode. 
3. During Ready Mode, "

ready

" displays.

4. From the Ready Mode, the oven can go to almost all of the other modes.

4. DOOR OPEN MODE

1. While the door of the oven is open, the oven shall be in Door Open Mode.
2. During this mode, the screen is blank. And the fan and oven lamp work.
3. When the door is closed, if User Option 

 op:60

 is selected and the oven was  running a manual or 

preset cook cycle, the oven shall enter Pause Mode. In all other cases, the oven shall return to Ready 
Mode with User Option 

 op:61

, set, opening and closing the door will clear out any information about 

a Manual or Preset Program which was running.

Summary of Contents for 688215


















Reviews: