24
Removing the upholstery
Unfasten the safety harness and take the shoulder protector pads off.
•
Turn the
•
Baby 0
+
SAFE TECH
round. Then undo the 4 fastening hooks found on the
sides, and the plastic strips.
Lastly, pass the straps and the buckle through the slots in the upholstery.
•
To fit the upholstery back onto the
•
Baby 0
+
SAFE TECH
follow the same steps in reverse
order.
NOTE: It is very important that the protector pads are fitted back on. They are an
important safety element and must be used always.
Fitting the mosquito net (depending on the model)
Unfold the hood. Undo the zip, found on the top part of the hood, and take the mosquito
•
net out.
Spread it out, fasten the elastic strip and the clips on the sides.
•
To put the net away undo the side clips and the elastic strip. Roll it up and store it in
•
the pocket.
Maintenance
Clean the plastic parts with mild soap and warm water.
•
Wash the upholstery and fabric parts by following the washing instructions indicated on
•
the different fabric care labels.