20
Fitting the foot cover
Place the foot cover on the
•
Baby 0
+
SAFE TECH
, fasten the Velcro on the sides and the
elastic band on the feet (fig.2).
Adjusting the hood
The hood has several positions.
•
To unfold it, pull the hood upwards (fig.3). Do the opposite to fold it.
•
Adjusting the carrying handle
Make sure you change the handle position correctly (fig.4-5).
•
A. Stability.
B. Installing on a pushchair.
C. Carrying, rocking, installing in the car using the Base fix
Baby 0
+
SAFE TECH
(sold
separately).
D. Installing in the car.
Press the two buttons on both sides of the handle to change its position.
•
Move the handle to the required position until it clicks into place.
•
Headrest adaptor
The headrest adaptor is designed to provide side support for the baby’s head and can
•
be adjusted as the baby grows.
It is advisable to use the headrest adaptor while it is suitable for the baby.
•
When you need to remove the headrest adaptor, simply unfasten the harness buckle,
•
remove the chest protector pads and pass the harness straps through the openings in
the headrest adaptor.
Fit the chest protector pads again.
•
To fit the headrest adaptor, follow the same steps in reverse order.
•
Adjusting the height of the harness
Find the distribution plate found on the back of the
•
Baby 0
+
SAFE TECH
backrest and
release the two shoulder straps of the harness (fig.6). Pass the shoulder straps out
through the slots in the backrest and in the upholstery.