5OPERATION
0446 924 001 GB
-9 -
© Eutectic AB2020
5
OPERATION
5.1 Overview
General safety regulations for the handling the equipment can be found in the “SAFETY”
chapter of this manual. Read it through before you start using the equipment!
WARNING!
To avoid shock, do not touch electrode wire or parts in contact with it, or uninsulated
cable or connections.
NOTE!
When moving the equipment, use handle intended for transportation. Never pull the
equipment by the welding torch.
WARNING!
Risk of crushing! Do not use safety gloves when replacing the wire, feed rollers and
wire bobbins.
CAUTION!
Before threading welding wire, make sure the chisel point and burrs have been
removed from the end of the wire to prevent the wire from jamming in the torch liner.
WARNING!
Rotating parts can cause injury, take great care.
WARNING!
To prevent the reel from sliding off
the hub, lock the reel by tightening
the nut anti clockwise!
