Scissor Lift
QJY-S3
3
1 Safety
1.1
Introduction
Thoroughly read this manual before operating the lift and comply with the
requirements of safety instructions. Always display the manual in a
conspicuous location.
Personal injury and property damage incurred due to non-compliance
with these safety instructions are not covered by the product liability
regulations.
1.2
Work area
Keep the work area clean and well lit.
Do not operate power equipment in explosive atmosphere, such as in
the presence of flammable liquids, gases, or dust. Power equipment can
create sparks which may ignite flammables.
Keep children and visitors away while operating power equipment.
Distractions can cause you to lose control.
1.3
Personal safety
Stay alert. Watch what you are doing, and use common sense when operating
power equipment. Do not use power equipment while tired or under the
condition of drugs, alcohol, or medication. A moment of inattention while
operating power equipment may result in serious personal injury.
RISK OF ENTANGLEMENT! Dress properly. Do not wear
loose clothing or jewelry. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts.
Avoid accident starting. Be sure the Power Switch is off before plugging
in; Plugging in power equipment with the Power Switch on invites accidents.
Remove adjustment keys or wrenched before turning on power equipment.
A wrench or a key that is left attached to a moving part of power
equipment may result in personal injury.
Do not overreach. Keep proper footing and balance at all times.
Properfooting and balance enables better control of the power equipment in
unexpected situations.
Use safety equipment. Always wear ANSI approved safety impact eye
goggles underneath a full face shield.
1.4
Tool use and care
Do not force power equipment. Use the correct equipment for your
application. The correct equipment will do the job better and safer at the rate
for which it is designed.
Do not use power equipment if the Power Switch does not turn it on or off.
Any equipment that cannot be controlled with the Power Switch is dangerous
