AXESS AUDIO VIDEO IP INTERCOM FROM 1 TO 4 PB
Technical data sheet no. 600-0206B
www.castel.fr
Page 3 / 12
FR
EN
CONNECTION
Power supply connection (24VDC)
The required power supply is 20 to 30VDC.
Note: The door entry station can be powered by the Ethernet
network in PoE.
Your door entry station is delivered from the factory in PoE
configuration.
IP network connection (ETH0)
The connection is made by an Ethernet 10/100/1000 Mbits RJ45
class 5e or 6 link
1 Ethernet port available.
Connecting the relay outputs
The connection is made via a 3-pin terminal block providing the
"Common (COM) / Rest (NC) / Work (NO)" interface.
If you are using one of these relay outputs to control an AC or
DC strike, wire a non-biased 58V diode in parallel on the dry
contact between COM and NO or COM and NC depending on
use (diode supplied).
Protection against electrostatic discharges
Connect the intercom to earth using the supplied lug (mounted on the
front panel).
